Warm Prompt
The products in this link are not original Epson,they are compatible products of third-party brands,and they are replacements for epson's original cartridges.
T6122 - T6124 T6128 Compatible Ink Cartridges Full With Ink
T6122 - T6124 T6128
Ink Cartridge is designed for Officejet Pro printers. Its design allows it to produce fast-drying, smudge-resistant prints.
Our colors are a virtual match of the original and since it's so incredibly close to the original there's no need to change the color profile or flush the lines, it's Plug & Play just like the original.
Product Instruction
Product Name : Compatible Ink Cartridges
Condition : For Epson
Cartridge Number : T6122 - T6124 T6128
Cartridge Color : MBK,C,M,Y,
Cartridge Capacity : 220ML/PC
Ink Type : Dye-based Ink, Pigment-based Ink, Sublimation Ink
Chip Type : Installed the stable cartridge chips
Advantage : Plug and Play,same as OEM quality
Warranty : 1:1 Replace Any Defective
Suitable Printers
For EPSON Stylus Pro 7450 9450 Printer
220ML - Phote Black Ink Cartridge
Installed With Stable Cartridge Chips
The ink cartridge has been installed with the chip,the quality is very stable.The chips show the exact amount of ink level.
HOW TO USE
placing ink cartridges
Before you begin a large print job, you should check your ink levels. If one of your cartridges is low, you can replace it before you start.
Or you can wait until the ink runs out, replace the cartridge, and then continue the job without any loss of print quality.
However, it is best to replace a low ink cartridge before starting a large print job.
You can install any combination of 110ml and 220ml cartridges.（This link cartridge is 220ml）
How to replace
Before you start, make sure the printer is powered on. Then follow these steps to replace an ink cartridge:
1. Note the color of the cartridge that is low or empty. This is the cartridge you need to replace.
2. Press the ink compartment covers to open them.
3. Raise the ink levers to the unlocked position.
4. Remove the empty ink cartridge from the printer.
5.Make sure the replacement cartridge is the correct color and remove it from its package.
6. Gently shake the cartridge before installing it.
7. Hold the cartridge with the arrow pointing toward the printer. Then insert the cartridge into the slot. Don’t force it in.
8. Lower the ink levers to their locked position.
9. Close the ink compartment covers.Once the cartridge is installed, the printer returns to its READY state.
